AGM-Grunt
The use of AGM-Grunt mesh is one of the most effective methods:
- to increase the bearing capacity of foundations and all structures by preventing mixing of soils (sand and gravel);
- redistribution of the load between sections of the structure, as a result of ensuring the transfer of stresses from overloaded zones to neighboring underloaded ones.
Polymer impregnation of the material ensures the resistance of the geogrid to mechanical damage, ultraviolet radiation, biological and chemical influences.
AGM-Grunt
|
Raw material type |
polyester |
||
|
Breaking load, kN/m, lengthwise / broadwise |
30/30 |
50/50 |
100/100 |
|
Impregnation type |
акриловая эмульсия |
||
|
Cell size, mm (standard) |
25х25, 40х40 can be produced with different cell sizes |
||
|
Elongation at break,%, not more than |
13 |
||
|
Delivery form |
In rolls |
||
|
Length, m |
100 |
100 |
50 |
|
Width, m |
from 1,00 to 5,20 |
||
|
Surface density, g/m2, not less than |
150 |
250 |
380 |
|
Technical document |
STO 80193846-003-2012 |
||