ATsEID Sheets

ATsEID - asbestos-cement electrical arc-resistant panel

ATsEID is intended for the manufacture of electrical panels, parts and bases of electrical machines, housings for arc-extinguishing chambers, gaskets and stoves, induction furnaces, fences for electric furnaces, etc., where protection and operation at high voltages is required. Also, ACEID is widely used as a building material (floors, asbestos-cement under-window slabs), its difference is extremely high strength and fire safety. Irrigation canals are often covered with these boards. 

Arc-resistant asbestos-cement electrical products are good electrical materials for widespread use with increased arc-resistance and electrical strength.

The use of ATsEID is effective at high temperatures. Products have high mechanical strength, durability, and resistance to decay. A layer of paint and any texture can be applied to their surfaces.

Our company offers various types of ATsEID plates:
ATsEID panel sizes: 500*1000, 3000*1500 mm
ATsEID panel thicknesses: 6, 8, 10, 12, 16, 20, 25, 30, 35 and 40 mm.
 

Advantages of ATsEID:

Inexpensive;
Durability (from 40 to 60 years);
Fire resistance;
Low thermal conductivity;
Low electrical conductivity;
Simplicity and low cost of installation;
Suitability for all climatic zones;
Environmentally friendly.
 

Technical specs	Measurement unit	Indicators
Flexural strength, not less than	kg cm/sq.cm.	350, 400, 450, 500
Impact strength, not less than	kg cm/sq.cm.	4
Water absorption	%	12-20
Dielectric strength	кВ/мм.	2
Arc-resistance at current of 20mA	С	4