Pentasil® – 1500

Application area

For the manufacture of molded products operating in various aggressive environments at temperatures from -50°C to +200°C

Indicators	Pentasil®-
Indicators	1501	1511	1521	1531	1541	1522	1503	1513	1523	1533	1543
Hardness, unit Shore A ⁽¹⁾	48-58	48-58	55-70	45-55	50-60	55-70	45-58	48-58	56-66	52-62	48-58
Rolling ability, min, not more ⁽²⁾	1	1	1	1	1	1	1	1	1	1	1
Plasticity, conv. units ⁽³⁾	0,5-0,7	0,5-0,7	0,45-0,7	0,45-0,7	0,45-0,7	0,3-0,6	0,5-0,7	0,45-0,7	0,45-0,7	0,45-0,7	0,45-0,7
Conditional tensile strength, MPa, not less ⁽⁴⁾	8,5	9	8	8	9,5	6,4	6	9	9	9	8,5
Elongation at break, %, not less ⁽⁵⁾	400	400	290	380	450	250	400	400	330	350	400
Relative residual deformation after rupture,%, no more ⁽⁶⁾	8	8	8	8	8	8	8	8	8	8	8
Tear resistance, kN / m, not less ⁽⁷⁾	18	18	15	15	15	14	18	18	18	15	18
Relative residual deformation in air under compression 20%, 200 ° C / 24 hours,%, no more ⁽⁸⁾						50	35
Electric strength at a frequency of 50 Hz, kV / mm, not less ⁽⁹⁾							20
Color	matted	white	red	Blue, gray	any	white	transparent, any	black	white	black	matted

Test methods:
(1) - GOST 263, p. 5.7 TU 2512-075-402450-2004

(2) - P. 5.3 TU 2512-075-402450-2004

(3) - GOST 415, p. 5.4 TU 2512-075-402450-2004

(4), (6) - GOST 270

(5) - P. 5.8 TU 2512-075-402450-2004

(7) - GOST 262, method G

(8) - GOST 9.029 (method B), p. 5.10 TU 2512-075-402450-2004

(9) - GOST 6433.3, P.511 TU 2512-075-402450-2004

Storage and transportation

Personal protective equipment and special clothing must be worn in accordance with typical industry regulations. Terms of use, storage and disposal must be coordinated with the authorities of the State Sanitary and Epidemiological Supervision.