Technical plate MBS

Technical plate MBS (oil and petrol resistant)

Purpose:

Vulcanized rubber and rubber-fabric technical plate MBS - oil and petrol resistant, intended for the manufacture of rubber products.

Description:

Manufactured in 2 classes:

1 - a technical plate with a thickness of 1.0 to 20.0 mm, intended for the manufacture of rubber-technical products that serve to seal units operating under a pressure of over 0.1 MPa;

2 - technical plate with a thickness of 1.0 to 60.0 mm, intended for the manufacture of rubber-technical products that serve to seal units operating under pressure up to 0.1 MPa, to prevent friction between metal surfaces, as well as for the absorption of single shock loads or as linings, flooring;

Types:

F - molded technical plates made by the method of vulcanization forms in molds on vulcanizing presses;

N - non-molded technical plates made by vulcanization in boilers, as well as on continuous vulcanizers;

Types:

I - rubber plate;

II - rubber-fabric plate.

Hardness degrees:

M - soft;

S - medium;

T - increased.

Specifications:

 

Grade	Class	Kind	Type	Hardness degree	Temperature range, °C	Working environment
MBS (oil and petrol resistant)	1; 2	F; N	I;II	M	from -30 to +80	Air of premises, containers, vessels; inert gases at a pressure of 0.05 to 0.4 MPa or oils and petroleum-based fuels, gasoline at a pressure of 0.05 to 10.0 MPa; nitrogen
				M1	from -40 to +80
				S	from -30 to +80
				S1	from -40 to +80
				T	from -30 to +80
				T1	from -40 to +80

Symbols examples of plates:

Plate of the 1st class, type F, type I, MBS grade, degree of hardness C, 10 mm thick:

Plate 1F-I-MBS-S-10 GOST 7338-90

The same, 1st class, type H, type I, MBS grade, degree of hardness M, 3 mm thick:

Plate 1H-I-MBS-M-3 GOST 7338-90

The same, 2nd class, type H, type II, MBS grade, degree of hardness C, with one fabric pad, 2 mm thick:

Plate 2N-II-MBS-S-1x2 GOST 7338-90