Volzhsky,
Volgograd region, K. Nechaeva Street,
6 "b" Volzhsky Chemical Complex
E-mail: vh1999@mail.ru

Boiler and tank gaskets

2_15.jpg

novaSEAL® OV - gaskets for pipelines, bottoms and inspection openings of boilers and tanks.

• The surface of the material has a special structure to ensure maximum sealing reliability.
• Well suited to valves regardless of their system.
• Compression and thermosetting reinforcement guarantees compaction with changing loads and modes.
• Provides limited tightness in cold water (about 15 ml / min) and complete tightness during boiler operation.
• The gasket is easy to install and remove.
• It is possible to tighten the gasket after starting of the boiler’s operation. It reliably ensures the operating mode of the equipment after installation and does not require additional straps.

Properties:
• Application range: 25 bar, 225°C
• Surface pressure: min. 5 N/mm2, max. 35 N/mm2
• Recommended heating value: max. 2°C/min
• Resistance of water / environment of the boiler: RDT 611

The gaskets are in standard sizes as shown below:
(inner oval x hem width x height)
80 x 120 x 15 x 8 mm 220 x 320 x 25 x 10 mm
100 x 150 x 15 x 8 mm 300 x 400 x 25 x 10 mm
120 x 160 x 15 x 8 mm 320 x 420 x 25 x 10 mm
150 x 200 x 15 x 8 mm 350 x 450 x 25 x 10 mm

Only this brochure can be used as a guide for installation and operation, as well as for the development of production conditions and the use of gaskets. This information cannot be used as a basis for warranty claims.

Areas of use:
novaSEAL® OV - gaskets for pipes, bottoms and inspection openings of boilers and tanks.
• The surface of the material has a special structure that is designed to provide maximum sealing reliability.
• Well suited to valves regardless of their system.
• Compression and thermosetting reinforcement guarantees sealing when loads and conditions change.
• Provides limited tightness in cold water (approx. 15 ml / min) and complete tightness during boiler operation.
• The gasket is easy to install and remove.
• It is possible to tighten the gasket after starting the boiler. It reliably ensures the operating mode of the equipment after installation and does not require additional straps.

Description of the material. novaSEAL® OV is manufactured from high quality thermal, corrosion and chemical resistant materials.

The special production technology of novaSEAL® OV with a special coating and the applied “endless ring” technology ensure maximum resistance to deformation and elasticity.