Oil and petrol resistant pressure head and suction hoses

Oil and petrol resistant pressure-suction, antistatic hoses TU 38105373-91 Hoses with a textile frame, a metal spiral, with soft cuffs at the ends.

Purpose: Used for suction and injection of gasoline, jet fuel, diesel fuel and oils Total electrical resistance of sleeves: before contact with oil products - no more than 107 Ohm, in the process of their contact with oil products - no more than 5109 Ohm. Service temperature of sleeves (from -50 ° С to + 90 ° С). Hoses must have at least three times the safety factor (3P) at rupture by hydraulic pressure.

Inner diameter, mm	working vacuum, MPa	Working pressure MPa	Hose length, mm	Cuff length, mm
25	0,08	0,8(8)	up to 10000	120
32			up to 10000	120
38			up to 10000	120
50			up to 10000	120
65			up to 10000	160
75			up to 10000	160
100			up to 10000	160

An example of a designation when ordering:

Hose 25-08-10000 TU 38105373-91

25-inner diameter, mm

08-working pressure, mPa 0.8

10000-arm length, mm 10000

Shipment rate:

Diameter	Diameter 25-50	Diameter 50-100
4-axle car	13000 r.m.	6500 r.m.
Three-ton container	700 r.m.	360 r.m.
Small dispatches	10 r.m.	-